VOG ("Voice 'o God")

Got together with Curtis and recorded him reading the Voice Over scripts for the various stories for the Ages. Sounds good. Needs some editing, but will be awesome.

Scripts for the Stories

Finished the scripts for the remaining Ages and the final Content story.

More Elemental Phicon stuff

We reprinted and retrained the phicon marker patterns and tested them. They seem to work okay despite the lower light levels seen as a result of the electronics re-orientation.

Elementals turned upside-down

Checked the wiring for our Elemental phicons. Took the electronics and reconfigured them so that the LED now points up and the battery holder is on the bottom. This prevents the uneven light "hotspot" from the LED seen in the center of the marker pattern before. However, the marker pattern is darker, in general, now due to the change.

AR "Magic Window" Handles

Figured out how to securely attach and engineer a frame and handles to hold the AR viewer in the "Magic Window" configuration.

More Greek Altar Mods

We found that the probability of someone losing the single, central marker on the Greek Altar's tabletop very high while trying to light fire. Therefore, a set of additional symbols were printed, affixed to the tabletop, and trained. Those include four variations of symbols representing Zeus and the three astrological fire signs (Aries, Leo, and Sagittarius). Testing with the added markers seems to show that the 3D objects are securely tracked and anchored at nearly all angles, positions, and orientations around the table.

Earth Age Phicons & AR Power

Finished the other 3 Earth Age phicons (electronics, markers, & pattern training). Wired the battery system for the AR viewer.

Greek Table Fire

The AR viewer with the new lens was having difficulty seeing the edge of the fire symbol on the fennel branch correctly, so it was reprinted with more white space around its edge then tested. Seems okay.

New AR Lens

Attached and recalibrated new lens for AR viewer giving a wider FOV. Unfortunately, we couldn't use the pinhole type because it didn't let in enough light and the image was too dark. So we went with a standard lens.

The Temple

Finished the shrouds and lighting for the Temple environment.